Print out of K-red and PER_MOD in (TOUGH3, PetraSim, ECO2N)

[Prince Kumar]

Hello,

 

I am working on TOUGH3 (ECO2N) using PetraSim to solve the injection of CO2 in Heterogeneous model, and I want to print k-red (permeability reduction) and PER_MOD (permeability modifier) in output file. 

Earlier, I used TOUGH2 using PetraSim, which able to print both parameters (k-red & PER_MOD) on its default setting. Now I am shifting to TOUGH3 using PetraSim. I enabled the OUTPU tab and Its on default settings. But its not printing k-red & PER_MOD.

I tried some modifications as suggested on internet by some users. But I am not getting correct solution. 

 

Thanking You 

[Alison]

Prince,

 

I am not sure that TOUGH3 is designed to output either of these parameters.  I am about to output Absolute Permeability (which take into account the PMX value) and Relative Permeability using the OUTPU block displayed in the attached image.

 

I would suggest that you contact LBL to see if its possible to output these other two parameters.

 

Best Regards,

Alison

 

 

[Alison]

For some reason, I'm not able to add an image. so here is the text that you can copy and paste into the OUTPU block:

 

OUTPU----1----*----2----*----3----*----4----*----5----*----6
PETRASIM
    4
SET                     1
SET                     2
ABSOLUTE                0
RELATIVE                0

[Prince Kumar]

Hi Alison, 

            Thank You