Jump to content
RockWare Support Forum

RockWorks 2021.9.16


Katy D
 Share

Recommended Posts

A new version of RockWorks2021 was uploaded to the RockWare website today, with new features, improvements, and bug fixes. 

 

The RockWorks Revision History has a complete list, by date, of all changes in the program.

 

New Features:

  • Users can now extract values from a solid model along the path of a borehole.
  • The "speed buttons" along the left edge of the Playlist tab sheet now display the icons on the left side of the text versus the icons being positioned above the text. This decreases the likelihood that options won't be visible when the height of the Playlist tab sheet is vertically reduced.
  • The borehole label font size that is used when plotting the index maps for profiles, sections, projected sections, and fence diagrams may now be adjusted by selecting the File / Options menu.
  • A new option titled “Include Additional Contacts Defined Within RwDat File” has been added to the “Strat. Rules” tab that is shown within all programs that create stratigraphy models based on borehole data.
  • A new program titled "Resample (Fine-to-Coarse)" has been added to the ModOps / Solid / Math sub-menu. This program is used to convert high-resolution solids to low-resolution solids based on a variety of options as shown below.
  • The Borehole Operations / Lithology / 2D Isopach option now displays two options: Voxel-Based and Grid-Based. The Grid-Based option behaves just like the previous version meaning that it generates surfaces based on the uppermost and lowermost occurrences of the selected lithology and then subtracts the lower from the upper surface to create the isopach grid. The new Voxel-Based option simply adds the heights of all voxels that are equal to the designated lithotype to produce the isopach. This new approach will account for voxels in-between the uppermost and lowermost occurrences that don't equal the selected lithotype (i.e. interbeds). 

 

Improvements:

  • The Stratigraphy Picker now has the option to snap stratigraphy to an existing lithology contact.
  • Added the ability to extract values from a Solid Model based on XYZ points stored in a datasheet.
  • Added a program to extract values from a grid based on XY points in a datasheet.
  • Users can now use the Aquifer Pattern Table colors for water symbols in 2D and 3D Striplogs.
  • Water level data can be appended to existing data, like T-Data allows. There is a check box on the block mapping tab for Water Levels to allow the user to make the choice to replace or append the data.
  • File | Export | Stratigraphy, will now export for "All Units" or for a single Stratigraphy Unit/Type.
  • The Lithology / 2D Isopach program no longer fits grids to the uppermost and lowermost contacts and subtracts them to produce an isopach grid. Instead, the program simply adds the heights of all voxels that are equal to the designated lithotype to produce the isopach.
  • An option titled "Clear Output Tabs Whenever "Process Playlist" Button Is Clicked" has been added to the Playlist / Configure pull-down menu. If checked, any open output tabs will be closed before the Playlist processing begins. The result is identical to pressing the "Clear" button before pressing the "Process Playlist" button. The idea is to reduce the clutter left behind by any previous Playlist data processing. The default setting for this new option is "off".
  • File | Export | Stratigraphy/Aquifers, will now export for "All Units" or for a single Stratigraphy Unit/Type. The unit type column was added to the output.
  • The editor for editing a database memo field in the Borehole Manager, like the comments in Lithology, has been more streamlined. There is now an OK and Cancel button on the bottom of the editor to either save back to the database or cancel the changes. The Save button is not shown but if the user wants to write out to a text file they can still choose Save from the menu. 

 

Bug Fixes

  • RockWorks no longer starts in the previous project if Select Project on Startup is selected on Preferences menu.
  • The Highest Probability solid modeling algorithm now returns the correct values instead of nulls.
  • The Fence Location dialog now updates the map when selecting locations from an XY Pair table.
  • The Rockplot3D Window will never be opened minimized.
  • The RockPlot2D Export to RockPlot3D now uses the transparency options for both draped and floating diagrams.
  • RockWorks will now allow NULL values for the "Collar Elevation". This change will allow the user to not enter a value for this field. Then when RockWorks looks to use the value for Collar Elevation, if it is NULL at that time, we would use the Elevation value in its place. This gives the user the ability to set the Collar Elevation to 0.0 if they want and for 0.0 to not behave as if the user did not enter a value. If they set one of the other tables to "measure depths from the Collar" and the Collar is NULL, that borehole would use the Elevation value in its place. The update of the field to nullable now also updates SQL Server databases.
  • GeoTIFF Import now honors "No Data" data values, converting them to the assigned grid NULL value. This true for the default "No Data" value of -32768 and when the Geo Key Directory of GDAL_NODATA is set.
  • P-Data | Histogram by Lithology no longer causes an Access Violation error when there is no Lithology and a Lithology Unit is chosen in the LithoTypes table under diagram options.
  • The Peripherals / Color Legend / Title may now be edited if the Title checkbox is checked.
  • The "Average" smoothing method for non-lithology modeling menus will no longer be switched to "Classification" after the Lithology Modeling menu has been used.
  • The Hybrid grid modeling no longer generates an Access Violation error inadvertently introduced during the previous update.
  • The text position for IData, IText, TData, Stratigraphy Text and Lithology Text in 2D Striplogs is now honored.
  • Project Folder | New - Creating a project based a custom coordinate system using an EPSG code no longer adds the "+init" to the parameter string (the +init was invalid).
  • When tilting or warping I-Data, T-Data, etc. models in conjunction with superface or subface model truncation, the program no longer produces strange gaps between the model and the truncation surface. Special thanks to Alison for taking the time to illustrate the problem within a Playlist. It shaved at least a day off the de-bugging. 

 

We recommend that Network license users install the RockWare Network License Administrator v. 1.15. Contact support at rockware.com for a link to the latest version.

 

To download this build, use the Help | Updates | Check for Updates menu inside RockWorks20. 

 

RockWorks Link, click on free trial tab:
https://www.rockware.com/product/rockworks/
where you can download the installation program and install the new build right over the top of the existing program. (DO NOT uninstall first.)
 
Note that you will not be able to use this new build of the program if your maintenance has expired before August 31, 2021.

Contact RockWare Sales or visit our Customer Portal (https://www.rockware.com/customer/) if you would like to update your maintenance.

 

Katy Duncan
RockWare Inc

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...