HectorMichan 0 Report post Posted April 17, 2017 Hello Folks! I have been doing a 3D model with p-data (borehole manager) and it works. Now, I want to extract the conductivity part of the volume, but, I don't know how. I tried with the tool "extract solid" from utilities, but did not work . Any Ideas? I think that I have a missing file or I need to do another grid. Please help. Share this post Link to post Share on other sites
TomB 0 Report post Posted April 17, 2017 Hi Hector, I don't know what you mean by "extract the conductivity part of the volume". If you want to extract a subset of a model for calculating volumes, choose the Utilities Solid | Filters menu. Use the Range Filter to extract the portion of a model between 2 specified values. Regards, Tom B RockWare Inc Share this post Link to post Share on other sites
HectorMichan 0 Report post Posted April 17, 2017 Hi Tom Thanks for your answer. I'm going to try. With "extract the conductivity part of the volume" I mean the lowest values of p-data. In my case I'm using resistivity data, so, the lowest is the most conductivity part of the volume. Thanks again. H. Share this post Link to post Share on other sites
HectorMichan 0 Report post Posted April 17, 2017 Hi Tom. Your procedure seems to work, I have my result (block model): but I want to obtain a result like the other image, where I have a 3-D model of the volume. Any suggestions? Thanks Again. Regards He. Share this post Link to post Share on other sites
HectorMichan 0 Report post Posted April 17, 2017 It's done! I did a boolean model then I multiplied with the original one and Bingo! Thank you. H. Share this post Link to post Share on other sites
TomB 0 Report post Posted April 17, 2017 Hi Hector, Good to hear! Thanks for letting me know. Regards, Tom B RockWare Inc Share this post Link to post Share on other sites