JoshM Posted July 21, 2016 Share Posted July 21, 2016 I am building a model with I-Data and when I append the model to an existing 3D stratigraphy model, it sits on top of the stratigraphy model. I've uploaded my project files to the https://www.rockware.com/upload/ for reference. Link to comment Share on other sites More sharing options...
JoshM Posted July 21, 2016 Author Share Posted July 21, 2016 I uploaded the I-data table to https://www.rockware.com/upload/ For some reason the model's top surface is 200 meters, while the project is only supposed to go as high as 50 meters. Link to comment Share on other sites More sharing options...
Brianna Posted July 21, 2016 Share Posted July 21, 2016 Josh, As I mentioned in the email to you, you should check the depths of your data. Looking at one borehole I can see that your stratigraphy data goes from 6.95-35 and your I-data starts at 1.9 and goes to 12 Clearly there's not much overlap and the data may appear to be above the stratigraphy. Link to comment Share on other sites More sharing options...
JoshM Posted July 22, 2016 Author Share Posted July 22, 2016 All of my grid files share the same project dimensions. How do I go about copying the surface grids to other surface grids? Link to comment Share on other sites More sharing options...
Brianna Posted July 22, 2016 Share Posted July 22, 2016 To copy one grid the another, you would just copy the one grid in the Windows file manager and change the name to the other file. Be sure to make a copy of the file you are replacing before overwriting the file. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now