Jump to content
RockWare Support Forum

Mitch

Admin
  • Content count

    551
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Mitch

  • Rank
    Advanced Member

Profile Information

  • Gender
    Male
  1. Creating 3D model for ERT Data

    The elevations are in absolute elevation. In your case the elevations in your datasheet are below the ground surface. You can either change the elevations in the datasheet or use the Offset setting in the menu to move the images above the ground.
  2. Creating 3D model for ERT Data

    I see the problem your elevations are below the ground surface. Enter and offset of 200 meters or more.
  3. Creating 3D model for ERT Data

    Delete or disable rows 1 + 2. You also need to select the image column not the name column for your input. Make sure that you have the other input columns correctly selected.
  4. Creating 3D model for ERT Data

    Send it to [email protected] with attention Mitch
  5. Creating 3D model for ERT Data

    Try selecting the file using the built in File Open Dialog. 1) If the column has not been assigned as an Image Name, right click on the header line, use the arrows to move to the column and select Image Name from the Content Type tab. 2) Now double click on each file name and select the file. If this still doesn't work attach a copy (not a picture) of your RwDat file for us to look at.
  6. Creating 3D model for ERT Data

    You can either copy them to the project folder or provide the full path to the location of the files.
  7. Creating 3D model for ERT Data

    Are the image files in the project folder? If not you'll have to include the full path in the datasheet. Are you getting any error messages? Do you get a KMZ file that loads in GoogleEarth? If you do please send it to us. From what I can see I'd disable or delete rows 1 and 2 which have titles. You can ignore the warnings but its annoying.
  8. I understand the problem now. Unfortunately items above the Start Depth won't plot. Sorry.
  9. Does your Symbol Column in the designer have the name "Point Symbol" or something else? If it doesn't match you need to change the name in the designer or in the data tab.
  10. Are you sure that your Symbol Column name matches the datasheet?
  11. Your tops are in elevation and they need to be in depth.
  12. I imported your data and there are a couple of problems. 1. Your grass unit only has 1 point. RockWorks requires a minimum of 3 points to make a surface. You can ignore the warnings and continue making the section. 2. You have duplicate units within some of your boreholes. Each stratigraphic unit can only occur once in each borehole. You can either rename them (e.g. sand1, sand2) or model them as lithology.
  13. How is your Northing entered in LogPlot? What Coordinate System are you using in your RockWorks project? It always helps to have an actual file that causes the error.
  14. Latitude Longitude Format

    It sounds like you have the Long/Lat entered on the Other Coordinate Projections but haven't converted them to your Project Coordinate System (UTM). There's a "To Easting/Northing" button on the Other Coordinate Projections tab where you can do them one at a time or go to Edit/Coordinate Converter (to Easting/Northing) to convert all your boreholes.
  15. Hmm, looks like you have the Symbol column selected for your G-Value. Without seeing your data I'd suspect that's the problem.
×