Jump to content
RockWare Support Forum

Daniele

Members
  • Content count

    48
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Daniele

  • Rank
    Advanced Member
  1. Grid editing with null values

    Thank you for your quick answer. I was looking for some tools inside Rockworks. After editing the grid file in RCK I export it to Surfer and to xyz dat file. Regards, Daniele
  2. Grid editing with null values

    I would like to edit a grid file containing null values. I couldn't figure out how to replace null values with a specified value. The only way I found is to manual edit the grid with Rockworks utilities. Is a there a better approach? Thanks, Daniele
  3. Rockworks upgrade: version 16?

    Hi, have you planned to build a new Rockworks release, not just an update? Can I have more information about the release's date and the upgrade fee (from a registered version 15) in order to get my company's allocation funds for it? Regards, Daniele Lattuada
  4. Profile from a (Lithology) Solid Model

    Hy Alison, I use AutoCAD to draw and share maps describing the environmental remediation options involved in the cleanup project. I get a custom layout with same scale, legend, symbols, notes which is difficult to convert in ReportWorks. I also note that the PDF from ReportWorks plot is rather a image map than a vector map, getting the document viewing process time consuming. Is there a way to plot profile with a distant axis computed from the starting to the ending point instead of X Y axis? You were right about assigning a different material type to the “A” intervals that fall below B but I choosed the Lihology model just to avoid the manual re-assignent of lithology strata. Thank you. Daniele
  5. Hi, I've a Lithology Solid Model. I need a profile in DXF format to be edited in Autocad. I choose Lithology -> Profile and export it in DXF format. The DXF file contains lots of polyline and polygon objects except from the surface profile which is a single polyline, as one would expect. Is there a way to get single polyline (or even more polylines, depending from the solid model complexity) for each Lithology materials? I get the same result if I choose Solid Model -> Profile. Is it the same? It's seem to me that the only difference is the color fill option. I've built a Lithology Model form 10 boreholes with materials A and B. Many boreholes have material A above material B, but some boreholes have sequence A (A1) B A (A2) . I choose Lithology -> Isopach -> Material A and I get the isopach contouring values of material A in each domain cell. If the solid model sequence is A (A1) B A (A2), the isopach for material A is obtained from the top of A (A1) and the bottom of A (A2). Is it correct? How can I get separate isopach from material A (A1) and A (A2)? Thank you. Daniele
  6. Create a KMZ file

    Ok. Thank you. Perhaps it will be useful to show some link to RasterSymbol in the Project Manager tree under Misc. Table and in the Help File (Columns Type page). Daniele Note: Enable 'show Hidden file' in folder property unless you could not find the folder. Thanks to TotalCmd command line auto completation for accessing the folder without changing Explorer Hidden file option.
  7. Create a KMZ file

    I filled the Datasheet with both est/north UTM and lat long coordinate and I choose KML -> Multiple Points (Flexible). I cannot find in the tree items (left side of the attached screenshot) the Custom Icon item to be checked to use custom icon files, as described in the instruction tab (left side of the attached screenshot). How can I show the Custom Icon item? My workround was: - create KMZ file - unzip it as a normal ZIP file - change the image file with my custom icon file (64 pixel png image) - repack and rename the KMZ file Regards, D Lattuada
  8. Contour option

    I've installed RKW in Windows 7 64bit Italian language. I set International options with . (point) for decimal separator and , (comma) for thousands separator. When I run any contouring map with Diagam options | Contour option checked I get no contouring output even if I get the right Contour Intervals in the confirm dialog box. I'd also checked the foreground and background color not to be the same. If I set RWK to use Colored interval I get the right map. Any suggestion? Regards Daniele
  9. Changed xyz data, lith model not plotting now?

    I'd to fix some duplicate I-Data resulting in import/export/update routines (from/to Excel). I was successful in remove duplicates and get the new model with Project -> Database Integrity (Check Database Integrity). Regards, Daniele
  10. Litholgy model & I-Data intersection

    Hi Alison, I understood that you were referencing on I-Data model. In the attached image you can see 2 profiles. The upper profile is obtained by 1) creating the lithological solid model (closest point) 2) exporting the solid model to XYZG 3) create a new Solid model with Vertical Distance Cutoff. In the lower one the same profile is obtained by the starting lithological solid model (closest point). In the S1031 the gray material is interpolated correctly in the upper profile and not in the lower one, as it extends far under the lithology unit. I need to correct this anomaly (green arrow). The profile from the Lithology Solid Model obtainend with Lithoblending algorithm doesn't show the anomaly, but I rather prefer the closest point algorithm. I also need to correct the solid model to fill the differnce from the topographic surface (red arrow) and the material top elevation in the upper profile. Regards, Daniele
  11. Litholgy model & I-Data intersection

    I tried the Solid Modelin Options "Distance Cutoffs" - Vertical CutOffs Options, Map Units = 1.0 m or 0.5 m for the I-Data -> Solid Model. These options are not avaliable in the Lithologyc -> Solid model. I only found in the Lithology Model Options -> Closest Point, the Distance Cutoff Filter but it seems to me that enabling and changing value affects only the xy solid model and not the z value. I also tried to export the Lithological Solid Model to the Utilities Datagrid with Lithology > Export to XYZG File (with Sample at Regular Intervals set to 0.1, the z model depth resolution) and then buid a New Solid Model with the Vertical CutOffs Options as I did for the I-Data Solid Model. Is there a quick way to do it? Daniele
  12. Litholgy model & I-Data intersection

    Thank you for your support. What I was looking is the Soldid -> Math -> Model (lithology model) x Moldel (boolean contaminant model). As you point out, the models must have same dimension and I had to check them before attenpting to performe any math operation. I followed the steps you provide me in the forum's replay and I got the map I was looking at. The map doesn't look as I aspected because of the contaminant model. In fact the contaminat map is made by values in the I-data table. As you can see from the attached image section the contamination in S1001 is not limitend by a lower not contaminated sample. The resulting map yield to overstimate contamination in G2 materials. Thank you. Daniele
  13. Litholgy model & I-Data intersection

    Yes you are right.
  14. Litholgy model & I-Data intersection

    That's ok. I don't have contaminated G1! Neither G2! I only have contamination (which refers to G1 or G2) and solid model (or boolean model) for G1, G2 and both G1 and G2.
  15. Litholgy model & I-Data intersection

    Thank you for your answers, but I'm still in trouble. I've already followed what you suggested me, but I could't get what I'm looking for. I choose Solid -> Model & Model and multiply between a Lithological solid model with boolean values (1 for material G1) and a I-Data contamination solid model with boolean values (1 for contaminated sample) with same xyz and node spacing. Then I made a surface map with Solid -> Convert -> Solid to Grid. In the resulting map I get the material G1 matching the contamination related to G1 AND G2 (where G2 and G1 are BOTH present). This issue arise when I've G1 AND G2 BOTH present. How can I separate contamination for G1 and G2 when they both are present? Regards, Daniele
×