Jump to content
RockWare Support Forum


  • Content Count

  • Joined

  • Last visited

Everything posted by rudyabo

  1. rudyabo

    I-Data model

    Thank you very much Tom for your help, the problem has been solved I would to ask you if possible to calculate I-Data volumetric for the distribution of chemicals in the lake by based on G-data filtering option (e.g. need to calculate the volume of contaminated water with As in the range between 0.5 to 5 ppb in the lake) thanks, Rudy
  2. rudyabo

    I-Data model

    Dear Tom, I checked the model setting and distance filter already disabled. I am really appreciate your support . I uploaded model database (file name: Rockwork.rar) on rockware uploading page thanks once again, Rudy
  3. rudyabo

    I-Data model

    Hi Tom, i tried to increse the grid resolution from 150x150 m to 100x100, i got same result.. (running a model with 100x100 resolution take time 3 to 4 hours) would you suggest another solution? thanks
  4. rudyabo

    I-Data model

    Hi Tom, thanks a lot for you suggestion, I will try this option and tell you about the result. regards, rudy
  5. rudyabo

    I-Data model

    Dear all, please anyone has a solution for the problem shown in the attached screenshot. after running the model there are no data the Interior areas along the lake boundary! the objective was to clip the model to the boundary polygon using filter to polygon option of the solid model. any suggestion would be appreciated thanks Rudy
  6. the problem has been resolved. thanks
  7. Thank you very much Alison, i will try to increse the model resolution and tell you about the result. Kind Regards, Rudy
  8. Dear all, i am going to model the hydrochemical analysis of water body by using I-Data modelling option in rockwork. before stating the modeli imported the shoreline of the lake and stored as rockwork polygon file which i used in the polygon filter option. once i run the model everything going well except the result! because two sampling points considered by rockwork as out of the boundary boreholes! after zooming to these points i saw that rockwork cut off the boundary at certain location (narrow Gulf) therefore, these points didn't inter the 3D interpolation. i tried to configure the bo
  9. Hi Tom, I changed the 3D and 2D created model, could you tell me how to import the GRD files (just rename the files?) thanks for your help
  10. Dear all, I have a question how to import old exciting rockwork15 project into the new released one (Rockwork16). I tried to do this by opining the project folder destination, unfortunately it couldn't import the creating models (3D models and grid files) any advice from you regards
  11. Dear Molly, thanks very much for you advice, I exported the created section into the Rockwork report. The result looking nice . Sincerely Rudy
  12. I forget to mention that the map is located right of the section, please any help
  13. Dear all, I tried to insert a location map next to the lithological section. The problem I faced that the map looking compressed (please have a look at the screenshot below), how to solve this issue? one more question regarding the lithological section, how to set the interval between sections line (e.g. 3 parallel sections)?. Sincerely
  14. Ok, that sounds good I recreated the .grd file and working well, thanks a lot for your help
  15. Hi all, when I start running the Lithology modelling an error massage pop-up : Error: Invalid Reference Grid The reference grid contains one or more null node values. The process must therefore be aborted. regarding the surface Grid I used 90m SRTM digital elevation model converted into Rockworks Grid file using Global Mapper. please how to solve this problem, should I change the grid interval of the model or the Grid file? I would appreciate any advice from you
  16. Hi Alison, that is really great , thanks for you help .. that was exactly what I asked for. best regards rudy
  17. Hi Rockwork users, in my project need to import the boundary area as a shape file into the lithological model. I'm wondering if there are any option to do this and to clip the created model to the boundary area. I noticed that there are no flexibility by defining the AOI in rockwork why? please need your help
  • Create New...