Jump to content
RockWare Support Forum


  • Content Count

  • Joined

  • Last visited

Everything posted by KPC

  1. Hi....thanks for you help TomB, i was suspect something similar, thanks, my problem was the few points to make the model.
  2. Hi TomB, Yes, you are right the differences exist in the original files, I already see that, But my question remains, do not understand how the interpolation gives the result as significant in specific sites. It seems strange this result, I've done this before and I had never given this. Maybe if you made a revised my point data can understand more my doubt, I have attached the file grid data.xls, columns X1, Y1 and Z1 are pre-failure data and columns X2, Y2 and Z2 are the data post- failure, hence generates both grids. Thanks again....Sorry so much trouble
  3. I sent you the grids, first one is "Pre-Failure_SA.grd" and second is "Post_failure_SA.grid", then i do a grid-math grid-grid & grid math subtract (Post_Failure_SA-Pre_Failure) my rockworks15 have revisión 2013.8.9, and was update 09/08/2013
  4. Thank you TomB. I have a problem with a grid, I'm trying to do a subtraction of grids but a get some inconsistent data, because in some points the diference between the first and the second grid is too big, you can see the file "grid problem" just uploaded using the link you recommended. Why this problem occurs? you can fix it somehow than go point by point editing the grid? Thanks for you help again..
  5. I need to make a question but i would like to attach some image at the post or send you a file bigger than 21KB how a can do that?
  6. KPC


    Thanks a lot Molly!!!
  7. Hi, everyone!!! I have a simple question.... How i can do a map with a "Hillshade" effect, using rockworks 15? Thanks for you help
  8. Thanks TomB, finally i did it with Excel like you suggest
  9. Hi Tom is me again, I already did everything you said, but no dot undestand after multiplying the length by a factor, as do the map of vectors?, To get the first and original map I used the Utilities Linears | Arrow Map, a was ok, but when i try to make the new map i don't how to use the new length, i don't see the option in the menu, the tool only supports the X and Y data. I used the grafix-3D utilities oriented objects and i got what i want but in 3D, however i need it in a plant view. I upload my data, the file is "Datos_estaciones_ES12.xls" please take a look, and told me how to do it. Thanks a lot for you help again.....
  10. Hi TomB. Thanks for you help, I did what you say, (multiply the Distance of movement by a factor with the Columns | Math | Column & Constant menu command.) but i do not how to do the vector map, because que enter parameters are X1, Y1 and X2,Y2 and I only have the distance multiply by a factor, i am using rockworks 15. How i can do this? Thanks for you help.
  11. Hi everyone! I have a problem with a vector map, when i do the map the arrows appear very small (that is because my movements are very small, too, see the file " I got this"), What I want to do is see the arrows more larger, representatively only for visual effects, see the file " I want some like this". TheThere is a quick way to do this? I hope that you can help me....thanks.
  12. Again, Thanks for you help, Tom!
  13. Hi, everyone! I want to know more about the horizontal lithoblending modeling method. Do you have some bibliografical reference? Thanks!
  14. Hi, everyone. I have a problem with rockworks 15 because i got the follow messaje: Error: UNABLE TO LOCATE SYMBOL FILE ********************************************************** Loading symbol file ".sym" The file that contains the symbol library cannot be located. What can cause this error?. How I can do for fix it? Like always thanks for you help.
  15. New Lithologic Modeling Options Posted on june 26 2014by Jim Reed in the rockworks blog...
  16. Sorry, i dont know why fails at the moment to past the webinar link.... youtube dot com QdvSyPPBO7A min 3:03
  17. Hi everyone! I want to ask, Which is the better (and easiest) form to do a stratigraphy or lithology 3D model with faults? How i can represent the movement's fault? for example if is inverse o normal fault? I would like What is the easiest way to do a "fault gouge" like i see in the webinar on youtube.com QdvSyPPBO7A minute 3:03? Do you have a kind guidance to do a fault in a pre-existing stratigraphy or lithology model? I wonder if you can explain me better this topic, thanks in advance.
  18. Hi. Today my cuestion is a easy one, Wich is the better configuration of hardware for use Rockworks 15 and 16? You always say the minimun requirements, but i would like to know the better and accessible hardware configuration that let me have acceptable performance, in desktop and laptop too. Thanks.
  19. Tom B. I know which is my mistake, i was entry a 0 valor in the replancement Range-Grid-Filter, and it has to be null.... Thanks Tom B.
  20. You read my mind!! the second file i can not send because was big, I did the Range_Grid_Filter and get the vertical grid 1 image..... Is similar but is no the same, i know that is somethin in the valor of the grid, and i dont know how to filter it, when i do a Grid_Profile i get the Vertical grid 2 image. Maybe i have some option actívate or inactivate, I moved the Project dimensions to new one with the default configuration but the result is the same.
  21. Hi TomB. I understand what the spacing to 2, I try reducing it. Still my result is not like yours and no where will be the error. I Attach 2 files with a details . Thanks.Vertical GRID.pdf
  22. Hi Tom, my XY spacing is 5x5 and Z=1, I try to decrease the XY spacing but doesnt work, and i used Grid Range Filter but i dont know how report the XY min, max and the others data like you suggest, my data are: X minimun =543,106.144455 X Maximun=544,769.144455 Y Minimun=1,110,446.075264 YMaximun=1,111,951.075264 Z minimun=190 Zmaximun=541 Spacing X=5 Y=5 Z=1 And the flat plane is: Dip Direction=300 Dip Amount=-88 Reference point X=544,290.219 Y=1,111,252.912 Z=304 Where I put this data in the Grid Range Filter? Thanks a lot! Ibe waiting you reply.
  23. Hi, i nedd to do sub-vertical flat plane (-88 degrees) with 300 dip direction , i try with GRID-INITIALIZE tool but the result is not what I expected, when I apply a limit up and down to this grid the result is worse and that makes me what you see in the figure below. What is the best way to make a grid subvertical as I want? Thaks a lot.
  24. I am using Rockworks/15 revision 2013.7.1
  • Create New...