Jump to content
RockWare Support Forum


  • Content Count

  • Joined

  • Last visited

Everything posted by SBrellen

  1. My CAD guy just let me know that the file I uploaded wouldn't work. I have uploaded 07005_xref.dwg, which should solve the problem Sorry about that.
  2. Tom I apologize for the long delay in replying to you. I have uploaded a DWG file associated with the files I previously uploaded. I believe I originally sent you (07005.09 - 2Q 2013 - Test & Test_1), which were DXFs for upper and lower saturated units at a site. The file name is 07005.09 - Fig. 1 - Site Map. It is an old map that was poorly created (which may be part of my problem) but it is the best we have without having to resurvey the entire site. Thanks again
  3. Also included is the .RK6 file for those DXFs Thanks
  4. Tom I suppose my initial question was quite vague on details. I have uploaded 2 files to Rockworks (07005.09 - 2Q 2013 - Test and 07005.09 - 2Q 2013 - Test_1). When imported into CAD, it does not scale properly and is plotted very distant from the map. Thanks for the help.
  5. I would like some assistance with exporting contour maps to AutoCAD. No matter the scale I set in RockWorks, the imported DXF does not match up with the CAD map. To force the fit in AutoCAD, I have to set a reference point and use the distances between two points to determine the appropriate scale. Thanks for the assistance.
  6. Tom Revisiting an old topic. Can you give examples of when I should use a T-data surface map over a plan map, and vice versa? I have a system of monitoring wells, all screened around the same interval, with several years of T-data for benzene. The interval I used for the spreadsheet is the screened interval, since I treat the groundwater samples as sort of a composite of all the formation water within that screen. I am unsure what slice from the plan map is an accurate representation of the impacts. The grid I use was created from surface elevations. How does the grid factor into the modelling? Thanks Stephen
  7. Could set the elevation as the top of casing and put in a negative collar offset?
  8. How should I account for having two elevations for each monitoring well (ground surface, top of casing) when creating different models? Aquifer models use top of casing, lithologic sections use ground surface. Currently I use the top of casing elevations in creating a surface grid but that causes display issues when creating a lithologic section. Thanks Stephen
  9. SBrellen

    LogPlot Export

    Is there a way to export a compiled Log directly to a PDF? Currently, the route I take is to export as a JPEG, add it to an already existing PDF, then print to PDF to normalize the scale for all documents. Thanks
  10. The groundwater samples are usually collected using a bailer following purging a set amount of volume from the well so I think of them as a composite of the water column without a set depth. If using low flow, the pump intake is placed in the center of the screened interval so I treat that as sampling an interval. The screened interval is usually set below the top of the saturated zone and, when not in drought conditions, the water column does extend above the screened interval.
  11. When entering borehole analytical data, is it better to use the depths of the water column or depths of the screened interval as "depth1" and "depth2".
  12. I am creating a profile diagram between 2 wells for DNAPL concentration. One well has I-data down to 90 feet and the other one only has data down to 80 feet. Is there a way to restrict the 80 to 90 foot area so that the lack of data is represented? I would still like to show some of the contours from the well with 90 foot data so I was thinking something like a sloped line in between the wells that cuts off the contours. Thanks -Stephen
  13. Tom Does the order in which you add construction types in the spreadsheet create an order in which they are displayed? Back to my original problem (and hopefully a quicker solution), when I insert a electrode from 59.0 to 60.0 in the spreadsheet, then a PVC riser from 50.0 to 60.0, the riser hatch pattern covers the electrode hatch pattern. Is there a way to bring the electrode hatch pattern to the front so that is always displayed?
  14. Thanks Tom. I wasn't really sure how to explain how I wanted the electrodes to appear. The electrodes were attached to the outside of the well and I wanted to display them that way. What I came up with is to break up the casing where it encounters a electrode i.e. say the casing is from 50 to 60, electrode is at 58. So I now the casing is from 50 to 58, electrode from 58 to 58.5 then casing from 58.5 to 60. I hope that is a better explanation. Thanks for the help
  15. I have a 100' well with electrodes attached to the outside of the well casing every meter. I want to create a well construction log with the electrode symbol on the outside of the well (see blurry example picture). I can get only one electrode to display the way I would like. I also cannot get the depths to display outside of the log (see picture again). The bentonite outer diameter is set at 4.0 and 2.0 for inner. Well casing is 2.0 and 0.0 for outer and inner, respectively. I have the electrodes set at 2.0 and 0.0 as well, with a 0.4 foot thickness and completely filled in red color. Actual thickness is 0.004 feet but I do not think it would display on a 100' striplog
  16. If have a 2-3 wells that are heavily impacted in a well network of about 25 (the remaining wells are not impacted), which algorithm would be best suited? The trouble I am running into is when I create a surface map of the benzene concentration, the heavily impacted wells skew the surrounding wells to appear as though they are impacted.
  17. Which would be the best algorithm to use when creating a model or a surface map of a benzene plume? And when I am creating a 3D model, what is the easiest way to restrict the display to only concentrations above a certain level? Thanks
  18. Is there a way to force log out network users on RockWorks? My company only has 2 licenses and sometimes the RockWorks leaves one or both of us logged in and unable to restart the program.
  19. When exporting a I-data plan map to Google Earth, the options for hemisphere, projection and zone are not listed. What step am I missing? Thanks!
  20. I would like to use a vertical scale on my I-data profile that has "0" at the top and increases downward. Is there a way to do this without changing my project dimensions? If not, what should I change my project dimensions to be so profile does not change? My wells are ~100 ft deep and the profile is from 48 to 98'
  21. Disregard the last post. I had it figured out, just had not realized it. My actual question should have been that I have resisitivty data for between wells, not just at the well. Is there a way to add and display that in RockWorks? My initial thought was to add boreholes in between wells at the specific x distance and have them only contain resistivity P-data. Thanks for the help
  22. Is Rockworks capable of displaying resistivity data between 2 boreholes? I ran a cross-borehole electrical resistivity survey in between 5 wells, spaced 6 meters apart and I was wanting to display the resistivity data in 2D fence diagrams. I am processing the data using AGI EarthImager 2D. Thanks!
  23. I am looking for the simplest way to combine multiple logs on one sheet with one header so I can make rough cross sections. I recently installed LogPlot with no prior experience on the program
  24. I am having difficulty combining multiple exported LogPlot files in ReportWorks. I am attempting to make a simple cross section using the line tool and would like to display multiple logs under one header Thanks
  • Create New...