First, let’s take a look at a contour map created using the EZ-Map tool in the RockWorks Utilities.

The EZ-Map tool uses simple triangulation to create contours.  For some data sets, this may be all you need to create a reasonable looking map.  However, it will often be necessary to create grid-based maps with smoother contour lines that extend to the edge of the project.  Note the increase in the groundwater elevation on the eastern edge of the map.  This is something that can be resolved by switching to a grid-based map.  We’ll explore grid-based mapping tools next.

Here is a map created using the default Inverse Distance Weighting settings.  I should note that I had both the “Smoothing” and “High-Fidelity” options turned on during grid creation.

The “bull’s eyes” that you see around the high and low points in the map are typical of the Inverse Distance interpolation method.  One way to resolve this is to decrease the number of points used during interpolation.

To do this, change the Number of Points used for the Inverse Distance Algorithm from 8 (the default setting) to 4 (which is more appropriate for a data set of this size).

Here is a map created with the modified “Number of Points” value:

The bull’s eye effect has been muted somewhat, but notice that the contours don’t honor the data extremely well.  Let’s move on to Kriging.

In the map below, I let the RockWorks program choose the appropriate variogram settings.  With Kriging especially, which can create fairly blocky models, I highly recommend that you turn on both the grid “Smoothing” and “High-Fidelity” options when
creating a contour map. 

This may be a little bit more to your liking, but the general groundwater flow direction could still be better represented along the borders of the map.  Just to cover all of our
bases, here is another map created using Triangulation gridding.  Unfortunately, there are some problems with edge effects in the resulting map as well.

None of these are really doing it for me.  At this point, I think that a lot of people would probably resort to hand drawing their contour maps, or adding additional control points to the data set to force the contours into the shape they have in mind.  Before you resort to these tedious and time-consuming options, I would recommend you look at the Densify and Polyenhancement options available in RockWorks15.

Here is a diagram showing the contour maps created with the Inverse Distance interpolation algorithm, with and without Densify turned on.  As you can see, the densification process (which adds additional control points to the data set before
interpolation using triangulation) straightens out the contour lines quite a bit.

I did the same test using the Kriging algorithm and got the following results.

Last but not least, here is a contour map created with the Polyenhancement option turned on.  When this option is activated, the program fits the data to a polynomial surface and then warps that surface to honor the data points (in this case, I choose a 2nd order polynomial surface).  I think I have my map!

In real life, I’ve found first, second and third order polynomials useful when creating groundwater contour maps.  If the groundwater flow direction is fairly constant through the area, go with a 1^st order polynomial (which is a planar surface).  If it is variable because of topography or a feature such as a river or stream, then a 2^nd or 3^rd order polynomial is the way to go.

The triangle map (created through the Map -> Multivariate Maps -> Spider Map menu in the RockWorks Utilities and imported into ArcMap as a DXF)  illustrates the relative percentages of Filtered Residue, Fluoride and Sodium in well water as triangles with variable shapes and sizes.  Each triangle “axis” is scaled independently based on the minimum and maximum measured value of that constituent normalized to values ranging from 0 to 100.

The triangle map shows a general increase in constituents in well water in the in the southern portion of the watershed, as illustrated by larger triangles in Northumberland and Lancaster Counties.  A more subtle trend can be seen when comparing triangles located along the groundwater divide (which generally follows the eastern border of Richmond County) to those closer to the rivers.  There appears to be a correlation between proximity to a river and the amount of TDS, Sodium and Fluoride in well water.